Coolbot Pro Setup WiFi Guide for Walk in Cooler YouTube
Posted on by
Coolbot Instructions. CoolBot Guide Setup, AC Benefits and Operation STEP 3 In an area where your PC or phone get good Wi-Fi reception, plug in the CoolBot Pro's Power Supply. For Mini-Split Air Conditioner installation instructions download the Installation Guide and follow along the video and the CoolBot Quick Start Guide
How Cold Can A CoolBot Get? from hvacseer.com
STEP 2 Connect the CoolBot Jumper to the CoolBot Pro using ONLY the provided silver/grey Data Cable The CoolBot uses 2 sensors (ROOM and FIN sensors), the HEATER cable (red tip) and a programmed micro-controller to direct your air conditioner to operate in such a way as to cool the room to a set temperature in between 33°F/0.5°C and 65°F/18°C without freezing up.
How Cold Can A CoolBot Get?
Page 13: Changing Settings On The Coolbot Pro CHANGING SETTINGS ON THE COOLBOT PRO The CoolBot will always remember all your last settings even if it has been unplugged for a long time. Page 13: Changing Settings On The Coolbot Pro CHANGING SETTINGS ON THE COOLBOT PRO The CoolBot will always remember all your last settings even if it has been unplugged for a long time. Common questions about the CoolBot, A/Cs, Uses, humidity, winter use, etc
How to Build A DIY WalkIn Cooler with A CoolBot. STEP 2 Mount the CoolBot on the wall next to the A/C's control panel side The CoolBot Pro uses 2 temperature sensors (ROOM and FINS), the HEATER cable (red tip) and a programmed micro-controller to direct your air conditioner to operate in such a way as to cool the room to a set temperature in between 33°F/0.5°C and 65°F/18°C without freezing up.
Do It Yourself Tutorials Build Your Own Walk in Cooler Using a. The CoolBot allows for thermostatically-controlled cool-down to 35°F/1.66°C. QUICK START SET UP GUIDE STEP 1 Plug the wires into the corresponding labelled ports at the bottom of the CoolBot temperature controller